Skip to content
St. Charles · St. Charles County

Whole-Home Rewiring in St. Charles, MO

MO License #20250016884.9 Star Average. 410+ Reviews.Cottleville, MO Office

St. Charles mixes historic homes near Main Street and Frenchtown with mid-century and newer neighborhoods, so service sizes, panels and wiring vary from one street to the next.

Problem Solver

Electrical Problem Solver

Pick what you're noticing. We'll tell you what it usually means, how urgent it is, and what fixes it.

Plan an upgrade

Older Home, Original Wiring

Homes from the 1970s and earlier can have ungrounded circuits, cloth-insulated wire or aluminum branch wiring that was never meant for today's loads.

Aluminum branch wiring remediation under way in Ballwin, MO: device-by-device connections made safe
Aluminum branch wiring remediation under way in Ballwin, MO: device-by-device connections made safe.

Common causes

  • Ungrounded two-prong circuits
  • Aluminum branch wiring
  • Deteriorated insulation
  • Past amateur work

Complete electrical system upgrades for older homes. Replace outdated knob-and-tube or aluminum wiring with modern copper throughout St. Louis and St. Charles County. We serve all of St. Charles, from Historic Main Street to the neighborhoods toward St. Peters.

Signs You Need This

Knob-and-tube wiring visible
K&T wiring is 80+ years old, ungrounded, and can't handle modern loads. Insurance companies often require replacement.
Aluminum wiring in home
1960s-70s aluminum wiring has connection problems causing fires. It needs COPALUM remediation or full replacement.
Cloth-covered wiring
Cloth insulation degrades and crumbles, exposing bare conductors. This is a fire and shock hazard.
Only two-prong outlets
Two-prong outlets mean ungrounded wiring. While adapters and GFCI protection help, full rewiring provides true grounding.
Insurance refusing coverage
Insurers often refuse coverage or charge premiums for homes with old wiring. Rewiring solves this permanently.
Fuse box instead of breakers
Fuse boxes indicate very old wiring that likely needs replacement along with the panel.
Charred or melted outlets
Burn marks indicate overheating from inadequate wiring. The entire circuit, possibly the whole house, needs inspection.
Home built before 1970
Pre-1970 homes often have wiring that can't safely handle modern electrical demands. Proactive rewiring prevents problems.
Pricing

What It Costs

An estimate, not a quote. Estimates for installs and upgrades are free; your exact flat price comes after we see the job, and it's the price you pay.

Partial Rewire

$4,000–$8,000

  • Rewire specific problem areas
  • Replace worst circuits
  • Upgrade panel if needed
  • Add grounding where possible
  • Modern AFCI/GFCI protection
  • Minimal wall penetration

Address worst areas when full rewire isn't feasible

Whole-Home Rewire

$10,000–$20,000

  • All new copper wiring throughout
  • New 200A panel included
  • AFCI protection for bedrooms/living areas
  • GFCI protection for wet areas
  • Grounded outlets everywhere
  • All permits and inspections
  • Attic/basement routing to minimize wall damage

Typical 1,500-2,500 sq ft home

Premium Rewire with Upgrades

$18,000–$35,000

  • Everything in whole-home rewire
  • Additional circuits for modern needs
  • EV charger circuit pre-wired
  • Dedicated home office circuits
  • Smart panel option (Span)
  • Network wiring integration
  • Ceiling fan and lighting upgrades

Large home or extensive modernization

More detail and tools on rewirestlouis.com.

How It Works

From First Visit to Final Inspection

Typical job: 3-7 days.

  1. Comprehensive Assessment

    We thoroughly inspect your existing wiring, identifying knob-and-tube, aluminum, or degraded wiring. We assess panel condition, map existing circuits, and evaluate access points through attic, basement, and wall cavities.

  2. Rewire Planning

    We design the new circuit layout, plan wire routing to minimize wall damage, and identify where strategic access openings will be needed. You'll know exactly where we need to cut and what the finished result looks like.

  3. Detailed Quote

    You receive a comprehensive quote covering the new panel, all wiring, devices, labor, and permits. We itemize the work so you understand exactly what's included. Drywall patching can be included or handled separately.

  4. Permit & Preparation

    We pull the electrical permit and prepare the home for rewiring. Furniture is moved or covered in work areas, and we establish our staging area for materials and tools.

  5. New Wiring Installation

    Working room by room, we run new copper wiring from the panel location through attic, basement, and wall cavities to every outlet, switch, and fixture location. We use strategic access openings to minimize damage.

  6. Panel Installation

    We install the new 200A panel (or larger if needed), terminate all new circuits, install AFCI breakers for bedrooms and living areas, GFCI breakers for wet areas, and label every circuit clearly.

  7. Device Installation

    With new wiring in place, we install new outlets, switches, and fixtures throughout the home. Every device is grounded, tested, and verified working before we move to the next room.

  8. Inspection & Completion

    We schedule the electrical inspection, address any inspector questions, and ensure you receive passed inspection documentation. Access openings are patched (or ready for your drywall contractor), and the job is complete.

Verified Reviews

What Homeowners Say About Our House Rewiring

Reviews that mention this work first.

Read all reviews
bbb review

Al T.

bbb

“Repaired and replaced multiple outlets and gfis in my house and garage and pool area worked on grounds repaired wiring on garbage disposal. Did a thorough inspection on my home. They have done work for me in the past adding outlets inside and outside, replacing circuit box and repairing our pool house. Very satisfied with this company. Hard working people. Thanks”

09/22/2025
google review

Linda B.

google

“I have used this company in the past and have always been happy with their work and price. They are prompt and courteous. I have a home with aluminum wiring and I know they will always take that into consideration when making repairs. I will continue to use this company.. L.Burns”

04/29/2021
facebook review

Shawn H.

facebook

“First Choice Electric did a great job finding the wiring issue we had in our home. They were fast and their service was great.”

03/23/2021

4.9 Star Average. 410+ Reviews. Google, Facebook, BBB and Angi.

Fully licensed and insured in Missouri:MO State License #2025001688,St. Charles County #E25-000008,St. Louis County #ES4501.Lifetime workmanship warranty on installed work.

FAQ

Questions About House Rewiring in St. Charles

Do you handle the permit for whole-home rewiring in St. Charles?

Yes. We pull the permit with the office that has jurisdiction at your address, St. Charles County or the City of St. Charles, and schedule the inspection. The permit is included in our quote.

Who is the utility for St. Charles homes?

St. Charles is served by Ameren Missouri or Cuivre River Electric Cooperative, depending on your address. When the work needs the power disconnected or a meter changed, we coordinate it with the utility for you.

Which parts of St. Charles do you serve?

All of St. Charles (63301, 63302, 63303, 63304) and the surrounding area, including St. Peters, Cottleville, Weldon Spring, St. Louis County.

How long does a whole-home rewire take?

Most homes take 3-7 days depending on size, access, and complexity. We work room by room to minimize disruption.

Will you have to cut into my walls?

Some drywall work is usually necessary, but we minimize openings using attics, basements, and strategic access points. We can patch or coordinate with your contractor.

Is knob-and-tube wiring dangerous?

It's not inherently dangerous when intact, but it lacks grounding, can't handle modern loads, is often degraded, and insurance companies frequently require replacement.

What about aluminum wiring?

Aluminum branch wiring from 1965-1973 homes has connection issues. We remediate with a CPSC-recognized method: AlumiConn connectors, COPALUM crimps, or a full copper rewire, with a permit and passed inspection on every job.

Can you provide an aluminum wiring remediation inspection report for my insurer or lender?

Yes. Every aluminum remediation we perform in St. Louis and St. Charles County includes a documentation package: a remediation letter on our letterhead naming the method and the connections addressed, the permit and passed inspection record, an itemized invoice, and a device-by-device photo log. Most insurance carriers accept this. If your lender or carrier requires a Professional Engineer's sealed certification, we coordinate the engineer's site visit after our inspection passes. The full process is on rewirestlouis.com/aluminum-remediation-certification.

Can I stay in my home during rewiring?

Usually yes. We work in sections and restore power each day. Some disruption is unavoidable but we minimize impact.

Will I need to repaint after rewiring?

Some drywall patching and painting is typically needed. We minimize openings, but some access holes are unavoidable. We can coordinate with painters.

Does rewiring include a new panel?

Usually yes. Old panels can't support modern AFCI/GFCI requirements. We typically include a new 200A panel with whole-home rewires.

Can you add more circuits while rewiring?

Absolutely. Rewiring is the perfect time to add dedicated circuits for appliances, workshops, and future needs.

Get Your Flat Price for House Rewiring

Free on-site estimate, and a flat price before any work begins.

Most estimates booked within 1-3 business days.