Partial Rewire
$4,000–$8,000
- Rewire specific problem areas
- Replace worst circuits
- Upgrade panel if needed
- Add grounding where possible
- Modern AFCI/GFCI protection
- Minimal wall penetration
Address worst areas when full rewire isn't feasible
MO License #20250016884.9 Star Average. 410+ Reviews.Cottleville, MO Office
Much of Chesterfield was built from the 1970s through the 2000s, so many homes have 150- or 200-amp service that now has to carry EV chargers, finished basements, pools and larger HVAC systems.
Pick what you're noticing. We'll tell you what it usually means, how urgent it is, and what fixes it.
Homes from the 1970s and earlier can have ungrounded circuits, cloth-insulated wire or aluminum branch wiring that was never meant for today's loads.
Common causes
Complete electrical system upgrades for older homes. Replace outdated knob-and-tube or aluminum wiring with modern copper throughout St. Louis and St. Charles County. We serve all of Chesterfield, from Chesterfield Mall to the neighborhoods toward Town and Country.
An estimate, not a quote. Estimates for installs and upgrades are free; your exact flat price comes after we see the job, and it's the price you pay.
$4,000–$8,000
Address worst areas when full rewire isn't feasible
$10,000–$20,000
Typical 1,500-2,500 sq ft home
$18,000–$35,000
Large home or extensive modernization
More detail and tools on rewirestlouis.com.
Typical job: 3-7 days.
We thoroughly inspect your existing wiring, identifying knob-and-tube, aluminum, or degraded wiring. We assess panel condition, map existing circuits, and evaluate access points through attic, basement, and wall cavities.
We design the new circuit layout, plan wire routing to minimize wall damage, and identify where strategic access openings will be needed. You'll know exactly where we need to cut and what the finished result looks like.
You receive a comprehensive quote covering the new panel, all wiring, devices, labor, and permits. We itemize the work so you understand exactly what's included. Drywall patching can be included or handled separately.
We pull the electrical permit and prepare the home for rewiring. Furniture is moved or covered in work areas, and we establish our staging area for materials and tools.
Working room by room, we run new copper wiring from the panel location through attic, basement, and wall cavities to every outlet, switch, and fixture location. We use strategic access openings to minimize damage.
We install the new 200A panel (or larger if needed), terminate all new circuits, install AFCI breakers for bedrooms and living areas, GFCI breakers for wet areas, and label every circuit clearly.
With new wiring in place, we install new outlets, switches, and fixtures throughout the home. Every device is grounded, tested, and verified working before we move to the next room.
We schedule the electrical inspection, address any inspector questions, and ensure you receive passed inspection documentation. Access openings are patched (or ready for your drywall contractor), and the job is complete.
Reviews that mention this work first.
4.9 Star Average. 410+ Reviews. Google, Facebook, BBB and Angi.
Fully licensed and insured in Missouri:MO State License #2025001688,St. Charles County #E25-000008,St. Louis County #ES4501.Lifetime workmanship warranty on installed work.
See everything about whole-home rewiring, or all our electrical services in Chesterfield.
Yes. We pull the permit with the office that has jurisdiction at your address, St. Louis County or the City of Chesterfield, and schedule the inspection. The permit is included in our quote.
Chesterfield is served by Ameren Missouri. When the work needs the power disconnected or a meter changed, we coordinate it with the utility for you.
All of Chesterfield (63005, 63017) and the surrounding area, including Town and Country, Ballwin, Wildwood, Creve Coeur.
Most homes take 3-7 days depending on size, access, and complexity. We work room by room to minimize disruption.
Some drywall work is usually necessary, but we minimize openings using attics, basements, and strategic access points. We can patch or coordinate with your contractor.
It's not inherently dangerous when intact, but it lacks grounding, can't handle modern loads, is often degraded, and insurance companies frequently require replacement.
Aluminum branch wiring from 1965-1973 homes has connection issues. We remediate with a CPSC-recognized method: AlumiConn connectors, COPALUM crimps, or a full copper rewire, with a permit and passed inspection on every job.
Yes. Every aluminum remediation we perform in St. Louis and St. Charles County includes a documentation package: a remediation letter on our letterhead naming the method and the connections addressed, the permit and passed inspection record, an itemized invoice, and a device-by-device photo log. Most insurance carriers accept this. If your lender or carrier requires a Professional Engineer's sealed certification, we coordinate the engineer's site visit after our inspection passes. The full process is on rewirestlouis.com/aluminum-remediation-certification.
Usually yes. We work in sections and restore power each day. Some disruption is unavoidable but we minimize impact.
Some drywall patching and painting is typically needed. We minimize openings, but some access holes are unavoidable. We can coordinate with painters.
Usually yes. Old panels can't support modern AFCI/GFCI requirements. We typically include a new 200A panel with whole-home rewires.
Absolutely. Rewiring is the perfect time to add dedicated circuits for appliances, workshops, and future needs.
Free on-site estimate, and a flat price before any work begins.
Most estimates booked within 1-3 business days.