Skip to content
Electrical Tips

The Environmental Impact of Switching to LED Lights in Your Property

Updated

How LEDs cut energy use and waste, how to read lumens, color temperature and CRI, and how to fix common dimming problems when you upgrade.

Written by the licensed electricians at First Choice ElectricMO License #2025001688

LED Lighting: Benefits, Selection, and Installation Guide

LED lighting has transformed home illumination. Lower energy bills, longer bulb life, and better light quality make LEDs the clear choice for modern homes. Here's what you need to know.

Electrical work for St. Charles & St. Louis County homes

Free on-site estimate, flat price before any work starts.

Why LEDs Win

Energy Efficiency

Power consumption comparison:

Light OutputIncandescentCFLLED
450 lumens40W9W4-5W
800 lumens60W13W8-9W
1100 lumens75W18W11-12W
1600 lumens100W23W14-16W

Bottom line: LEDs use 75% less energy than incandescent bulbs.

Lifespan

Bulb TypeTypical Life
Incandescent1,000 hours
CFL8,000 hours
LED25,000-50,000 hours

What this means: An LED running 3 hours daily could last 20+ years.

Heat Output

  • Incandescent: 90% of energy becomes heat
  • LED: Minimal heat at the bulb

Benefits: Safer to touch, less cooling load, better for enclosed fixtures.

Understanding LED Specifications

Lumens, Not Watts

Lumens measure brightness. Watts measure power consumption.

Choosing brightness:

  • 450 lumens: Accent lighting, bedroom lamps
  • 800 lumens: General purpose, reading
  • 1100 lumens: Task lighting, kitchens
  • 1600+ lumens: Bright task areas, workshops

Color Temperature (Kelvin)

TemperatureAppearanceBest For
2700KWarm whiteLiving rooms, bedrooms
3000KSoft whiteGeneral living spaces
3500KNeutralKitchens, bathrooms
4000KCool whiteTask areas, offices
5000K+DaylightWorkshops, garages

Tip: Match color temperature throughout connected spaces for visual consistency.

CRI (Color Rendering Index)

What it measures: How accurately colors appear under the light.

Scale: 0-100 (higher is better)

Recommendations:

  • 80+ CRI: Minimum for general use
  • 90+ CRI: Best for kitchens, bathrooms, anywhere color matters
  • 95+ CRI: Photography, art areas

LED Types for Different Applications

Standard A-Shape Bulbs

Use for: Table lamps, ceiling fixtures, enclosed fixtures (if rated)

Bases: E26 (standard), E12 (candelabra)

Reflector Bulbs (BR, PAR)

BR (bulged reflector): Recessed cans, track lighting

PAR (parabolic): Outdoor floods, directional lighting

Decorative Bulbs

Globe (G): Bathroom vanities, decorative fixtures

Candelabra: Chandeliers, sconces

Edison/Filament: Visible bulb fixtures, vintage aesthetic

Specialty LEDs

Tube LEDs: Fluorescent replacement (T8, T12)

Disk/wafer lights: Low-profile recessed applications

Strip lights: Under-cabinet, accent lighting

Dimming LEDs

The Challenge

Not all LEDs dim well with all dimmers.

Problems with wrong combinations:

  • Flickering
  • Buzzing
  • Incomplete dimming range
  • Lights not turning on at low settings
  • Premature LED failure

Solutions

Check compatibility:

  • Use LEDs labeled "dimmable"
  • Match LEDs to compatible dimmers
  • Use LED-rated dimmers
  • Check manufacturer compatibility lists

LED-rated dimmers:

  • Designed for LED loads
  • Handle lower wattages
  • Provide full dimming range
  • Eliminate most flickering issues

Replacing Existing Bulbs

Simple Swaps

Just unscrew and replace:

  • Table and floor lamps
  • Ceiling fixtures with standard sockets
  • Outdoor fixtures (use weather-rated LEDs)

More Complex Changes

May need electrical work:

  • Recessed lighting conversions
  • Fluorescent to LED retrofits
  • Dimmer switch upgrades
  • Under-cabinet lighting installation

Recessed Lighting Upgrades

Options

Retrofit kits:

  • Screw into existing socket
  • Replace trim and bulb together
  • No electrical work required

Full conversion:

  • Replace entire can with LED wafer
  • Lower profile, more modern look
  • Requires electrical connection changes

IC-rated considerations:

  • Check if existing cans are IC-rated (insulation contact)
  • Non-IC cans need clearance from insulation
  • LED generates less heat but ratings still apply

LED Integrated Fixtures

What They Are

Fixtures with LED sources built in. No replaceable bulbs.

Advantages:

  • Designed as a system
  • Often better performance
  • Sleeker designs possible
  • No bulb replacement needed for years

Considerations:

  • Replace entire fixture when LEDs fail
  • Can't upgrade just the bulb
  • Quality varies significantly

Smart LED Options

Features Available

  • Dimming via app or voice
  • Color temperature adjustment
  • Full color changing (millions of colors)
  • Scheduling and automation
  • Motion sensing
  • Integration with smart home systems

Installation

Most smart bulbs:

  • Screw in like regular bulbs
  • Require constant power (switch stays on)
  • Connect via WiFi or hub

Smart switches:

  • Replace existing switch
  • Work with any bulbs
  • Maintain physical control

Cost Savings Calculation

Example: Replacing 20 bulbs (60W equivalent):

FactorIncandescentLED
Watts per bulb60W9W
Total watts1,200W180W
Hours/year (3/day)1,0951,095
kWh/year1,314197
Cost @ $0.12/kWh$158$24
Annual savingsn/a$134

Plus: No bulb replacements for years.

Installation Services

What we can help with:

  • Dimmer switch upgrades for LED compatibility
  • Recessed lighting retrofits
  • Under-cabinet LED installation
  • Outdoor LED upgrades
  • Smart switch installation
  • Whole-house LED conversion planning

Contact us for LED lighting upgrades.

Electrical work for St. Charles & St. Louis County homes

Free on-site estimate, flat price before any work starts.

Get new posts by email

One short email when we publish. No spam, unsubscribe any time.