Outlet & Switch Installation
Upgrade your outlets and switches for modern convenience and safety. USB outlets, smart switches, and GFCI protection throughout your St. Louis area home.
What We Provide
Why It Matters
Signs You Need This Service
Not sure if you need outlet & switch installation? Here are the warning signs to watch for.
Outlets feel warm or hot
Warm outlets indicate loose connections, overloading, or internal arcing. This is a serious fire hazard requiring immediate attention.
Sparking when plugging in devices
Occasional small sparks are normal, but frequent or large sparks indicate worn contacts or loose wiring. Replace the outlet.
Plugs fall out of outlets
Worn outlet contacts no longer grip plugs securely. Besides inconvenience, loose connections can cause arcing and fires.
Two-prong ungrounded outlets
Older homes may have ungrounded outlets that don't protect electronics or prevent shock. Upgrade to grounded outlets for safety.
Cracked or damaged outlet faces
Cracked outlets expose live wiring and are shock and fire hazards. Replace immediately—outlets are inexpensive.
Outlets don't work consistently
Intermittent outlets indicate loose wiring connections, often backstabbed wires that have worked loose over time.
No GFCI in kitchen or bathroom
GFCI outlets are code-required near water. Without them, you risk electrocution from wet hands or appliances near sinks.
Using too many power strips
Overreliance on power strips indicates you need more outlets. Adding outlets is safer than daisy-chaining strips.
What's Included
Transparent pricing with no hidden fees. Here's exactly what you get.
Outlet/Switch Replacement
$75–$125 per device
- Removal of existing device
- Installation of new outlet or switch
- Tight, secure connections (not backstabbed)
- Testing and verification
- Cover plate installation
Standard outlet or switch swap
GFCI/AFCI Upgrade
$125–$200 per location
- GFCI or AFCI outlet installation
- Proper downstream protection setup
- Trip testing and verification
- Code-compliant installation
Kitchens, bathrooms, garages, bedrooms
New Outlet Installation
$200–$400 per outlet
- Wire routing from existing circuit or panel
- New electrical box installation
- Choice of outlet type (standard, USB, GFCI)
- Wall plate and finish work
- Patching not included
Adding outlet where none exists
Our Process
1. Needs Assessment
We discuss what you want to accomplish—adding USB charging, installing smart switches, upgrading to GFCI protection, or adding new outlet locations. We inspect existing wiring and box sizes to determine the scope of work.
2. Device Selection
We help you choose the right products for your needs. Do you want USB-A or USB-C outlets? Dimmer or smart switches? We explain the options and make recommendations based on your lifestyle and budget.
3. Quote & Scheduling
You receive a quote covering all devices and labor. For simple replacements, we can often complete the work same-day. For new outlet locations requiring wiring, we schedule a convenient installation time.
4. Power Off & Safety
We turn off power at the breaker panel and verify circuits are dead with a voltage tester. Safety is our top priority—we never work on live circuits.
5. Professional Installation
We remove old devices, inspect wiring condition, and install new outlets or switches with proper connections. We use screw terminals (not backstabs) for reliable, long-lasting connections.
6. Testing & Verification
Every outlet is tested for proper wiring (no reversed polarity or open grounds), GFCI outlets are trip-tested, and smart switches are configured and connected to your WiFi or hub. We demonstrate operation before leaving.
Frequently Asked Questions
Common questions about outlet & switch installation
Do USB outlets use power when not charging?
Quality USB outlets use minimal standby power (less than 0.5W), similar to leaving a phone charger plugged in.
What's the difference between GFCI and AFCI?
GFCI protects against shock in wet areas. AFCI protects against electrical arcs that can cause fires. Both are required in specific locations by code.
Can smart switches work without a neutral wire?
Some can (like Lutron Caseta), but most work best with a neutral. We can check your wiring and recommend compatible options.
How many outlets can you add?
We can add outlets almost anywhere. The main factors are running new wiring and available circuit capacity.
Why do my outlets look burnt or discolored?
Discoloration often indicates overheating from loose connections or overloaded circuits. This is a fire hazard that should be addressed immediately.
Should I upgrade to tamper-resistant outlets?
Yes. Tamper-resistant outlets are required by code in new installations and protect children from inserting objects. We recommend them throughout your home.
What's the benefit of USB-C vs USB-A outlets?
USB-C provides faster charging (up to 30W vs 12W) and works with newer devices. We recommend outlets with both USB-A and USB-C ports.
Can you add an outlet in my kitchen island?
Yes. Code requires outlets in kitchen islands over a certain size. We can install floor outlets or route power through the base.
Outlet & Switch Installation Near You
We provide outlet & switch installation services throughout St. Charles County, St. Louis County, and surrounding areas.
Find Outlet & Switch Installation Services in Your City
Related Services
Other services you might need
Light Fixture Installation
Transform your home with professional lighting solutions. Recessed lighting, chandeliers, under-cabinet lights, and landscape lighting.
Learn more →Whole-Home Surge Protection
Protect your electronics, appliances, and HVAC systems from power surges with professional-grade surge suppression.
Learn more →Whole-Home Rewiring
Complete electrical system upgrades for older homes. Replace outdated knob-and-tube or aluminum wiring with modern copper.
Learn more →Ready for Your Outlet & Project?
Contact us today for a free estimate with exact pricing before any work begins.